UV glue, Shenzhen UV glue, groups of plastic, UV lamps, UV glue, UV groups of plastic, Introduction: UV-610 UV-curing adhesive is designed for all kinds of electronic industrial production of glass, plastic, metal and other adhesive material of electronic devices, sealing, coating, cable data connector fixed component fixed, replace epoxy resin is also used in lighting, glass crafts small area and other fixed and bonding, encapsulation. Its clear and transparent after curing no traces of radiation in the ultraviolet light, the glue curing rapidly, as one with the substrate, resulting in high adhesion strength. In particular the application of UV-resistant acrylic, PC and other materials, Then the strength of the hardened substrate body strength even more than, the plastic is a very excellent adhesive. Then the plastic substrate to have a lower color or slightly transparent cases, only enough to light the need to increase the time until the glue is completely cured. I. Product Features: nature tough, shock absorption and resistance to thermal shock, long-term use unglued; link can be generated to react with the substrate itself, then play high-strength; and can be applied to a variety of plastic materials? ; plastic materials widely solve problems then. Second, the [resin Specification: Appearance colorless liquid ???? ???? ??????? / Viscosity (25 ℃, cps) 30000 ??? / chrominance proportion Gardner Scale ?? 2??? (20/20 ℃) ??1.03 ??? ???? / boiling point 760mmHg. ℃ 203 ??? ???? /? vapor pressure of 20 ℃. mmHg? <0.13? flash point Setaflash. ℃?> 90 ?? UV light wavelength ultraviolet light, 365-400nm light intensity is greater than 10mW / cm2, and conditions are:? / Vapor Density (Air = 1) ?? 6.8 ?? / solvent content 0% ??? III curing conditions [] Test .UV UV glue curing ultraviolet light irradiation necessary condition is essential for UV curing UV glue products. ?? Positioning time (sec) 8. / completely cured Conditions Time (sec) 40-60 IV characteristic [finished]: hardness (Shore Durometer) 70 ~ 80 ± 10 / absorption (7 days%.) 0.81. / boiling water boil test 100 ℃ / 24hr pass / resin normal room temperature -40 ℃ --100 ℃? / adhesion strength (tensile mode) kg / cm2. / PC on Acrylic ----- 196 (PC base Fracture) ??? metal on acrylic ----- 209 (acrylic base fracture) ????? UV glue, Shenzhen UV glue, groups of plastic, UV lamps, UV glue, UV groups of plastic,